Questions tagged [torsocks]
Torifying wrapper to redirect the traffic of socks-compatible apps through the tor network.
154
questions
0
votes
1
answer
43
views
[Iran][Fedora] Torsocks doesn't work even though tor is installed and running
The service is enabled and active, furthermore journalctl -exft Tor says it is bootstrapped 100%.
However running torsocks on and trying to ping hackage.haskell.org will return nothing, ditto for ...
0
votes
0
answers
91
views
connecting tor over ssh error Socks proxy failed to connect, error 4 (host unreachable)
I already had setup hidden service on my pi4 and it was working just fine until I decided that I'd install the same config on another sd card and from then on it gives me the same error again and ...
0
votes
1
answer
44
views
Sourcing “torsocks on” in fish and dash shells
I have used torify for a while to ad hoc route the traffic of certain applications through Tor and just today noticed that the man page suggests using torsocks instead. Reading through the torsocks(1) ...
1
vote
1
answer
161
views
burpsuite onion http request intercept
I have an Onion Website, and i want to try and exploit it to find the Real IP-Address behind this Service.
The problem:
'Cannot intercept Traffic from .onion' i also used this Settings in BurpSuite:
...
0
votes
1
answer
225
views
How could p2p connections work in Tor?
Besides that Tor should not be used for p2p traffic because of network congestion and possible IP leaks in BitTorrent applications, how could it work in theory?
Assuming that the BitTorrent ...
0
votes
0
answers
115
views
Tor Transparent proxy as gateway not working
I am trying to setup a Tor Transparent Proxy and redirect all its traffic to eth1 which will act as gateway.
Network setup:
eth0 < public interface
tap0 192.168.56.1 < Tor interface
eth1 10.10.0....
1
vote
1
answer
96
views
Using torify with another browser?
How do you use torify with another browser through a bridge? (because tor is blocked by the ISP)
0
votes
1
answer
189
views
How to implement a hidden service with bridges?
If my ISP blocks access to tor nodes, I would get bridge info from official tor website and connect tor again but how can I make my hidden service to use bridges ? Does hidden service even need ...
0
votes
1
answer
256
views
Is it useful turn on "keep alive" for Tor SOCKS5 TCP connection?
Wasabi Wallet application connects to the Tor SOCKS5 endpoint (code) and it specifies various "keep alive" options for that socket connections. Note that the TCP connections connect the ...
1
vote
0
answers
48
views
<crossout>onionmx broken due to torsocks ipv6 abandonment</crossout>
Edit: Actually the torsocks v1.4.0 --ipv6 option has been working for me. See https://github.com/ehloonion/onionmx/issues/38#issuecomment-1173104130
[I've been trying][1] to get [onionmx][2] working ...
0
votes
1
answer
215
views
Tor stream isolation using torcc
I use torsocks for 3 applications: IRC, SSH and Thunderbird (My Tor browser uses port 9150 from the torbrowser bundle daemon). I want to use a different tor circuit for each application. On the ...
0
votes
1
answer
468
views
How to use torsocks with python urllib3 and along a domain name where ipv6 is availaible ? Or rather disable ɪᴘᴠ6 in that case?
Simply trying to access en.wikipedia.org with a python script where a huge stack of dependencies prevents configuring a proxy (would take a year in order to rewrite dependencies for getting proxy ...
5
votes
1
answer
1k
views
Torsocks doesn’t torify on macOS
I can’t get Torsocks to work properly on macOS 12.3 Monterey, while it works perfectly on Raspbian 11 Bullseye. The program seems to work, but it doesn’t torify the traffic. The version is Torsocks 2....
0
votes
1
answer
190
views
running 2 clients at same time and getting stucked at 95% circuit_create: Establishing a Tor circuit after couple of minutes
im running the expert tor.exe client (tor1 and tor2 at the same time) within a python script and selenium module.
the 2 tor.exe clients are getting killed after every run to get a new ip.
first runs ...
2
votes
1
answer
263
views
Why doesn't `torsocks git clone https://github.com/ElementsProject/lightning.git` work?
torsocks git clone https://github.com/ElementsProject/lightning.git
does not work and gives me:
Cloning into 'lightning'...
1643140279 PERROR torsocks[51452]: socks5 libc connect: Connection refused (...
1
vote
1
answer
591
views
irssi with Tor - Mapped hostname not working
I'm a newbie to Tor so maybe I'm doing something wrong.
I installed Tor in a Raspberry Pi Zero W, connected to the local network, and modified the /etc/tor/torrc file so that it can be accessed only ...
0
votes
2
answers
625
views
Not able to ssh over tor
I did setup and V3 hidden service for ssh but I'm not able to connect to the server through tor. When I run torify ssh [email protected] get the following error:
1639811611 ERROR ...
0
votes
1
answer
273
views
Cannot connect to tor hidden sevice on my server after years of use
may I please ask for help? My hidden service is now not working after years of using it. It is installed on ubuntu server. When I try to access it with tor browser, I now get "Invalid onion ...
0
votes
1
answer
194
views
VPN through Tor. Are there any errors in my settings and can anonymity be improved?
I need to route traffic from multiple mobile apps and all sites through tor.
Some apps and websites block tor traffic. For this reason, I decided to use tor and vpn together (vpn through tor). I know ...
2
votes
1
answer
175
views
Tor metrics returns blank page for me
I have noticed that metrics options were added in PR 2096. However, when I open http://127.0.0.1:37991/metrics I get only a blank page.
I use tor.exe file to send HTTP requests through Tor's SOCKS5 ...
0
votes
2
answers
98
views
Tor SOCKS5 proxy returns question mark character (`?`) instead of valid HTTP response from time to time
An application I work on works with Tor SOCKS5 and uses that to send HTTP 1.1 requests and receive HTTP responses.
It works great but from time to time it happens that instead of an HTTP response ...
0
votes
3
answers
5k
views
Tor SOCKS5 Not Working With Anything Other Than Tor Browser
I am running Tails OS on a live USB and am attempting to run traffic through Tor.
The Tor Browser is working via the SOCKS5 proxy on 127.0.0.1:9050.
When I try to run:
curl --socks5-hostname localhost:...
0
votes
1
answer
272
views
How to connect android device to TOR programmatically
I would like to build an application that connects the phone like Orxy/Orbot, although I cannot figure out how.
How might I connect to tor using java, or connect to the socks proxy tor interface in ...
0
votes
1
answer
135
views
Tor daemon is frozenn ( Rend stream is 120 seconds late.)
Good day, i have some problem with tor daemon on Linux.
i use tor daemon to proxy access some site, but periodic tor is frozen, and can't proxy requests.
in logs i seee only this.
Oct 07 02:29:54 Tor[...
0
votes
1
answer
436
views
Connecting an ESP32 to a site via a SOCKS5 proxy
There is a lot of talk about the poor old ESP32 chip not being able to handle TOR due to its resource constraints, and I know there is one library out there that might work if I had platform.io and ...
0
votes
2
answers
106
views
Site operator gets real IP when I do "torsocks curl example.org/file.zip"?
Quote from Reddit
One thing, though: Don't think Torsocks is a jail. It's not even close. Applications can reach clearnet if they're explicitly trying.
I download files with:
torsocks curl example....
0
votes
1
answer
539
views
Burpsuite and Tor browser problem
I set http / https proxy as 127.0.0.1 / 8080 in tor browser and set socks proxy as 127.0.0.1 / 9150 in burpsuite. But whenever i click 'connect' in tb, it doesn't work. what is wrong???
OS : win 10 ...
2
votes
2
answers
1k
views
torsocks on macOS: ERROR: YYY is located in a directory protected by Apple's System Integrity Protection
I wish to tunnel CLI tools over tor network in macOS 11.5.2
None is working.
I only installed torsocks, did no configuration.
brew install torsocks
torsocks whois example.com
ERROR: /usr/bin/whois is ...
0
votes
1
answer
1k
views
Prosody XMPP server with onion domain
I set up the XMPP Prosody server in conjunction with the onion domain, it works fine with v2 domains, but when I trying to configure it with onion v3, it does not connect. Everything is clear in ...
0
votes
1
answer
183
views
When the domain is called, port 8080 is attached?
I am trying to create a hidden service in TOR this due to learning reasons.
It all seems to work fine when I want to use this normally with HTML.
But as soon as I want to install a dynamic web ...
0
votes
0
answers
26
views
Tor client fails when making bulk requests in a short period of time
I have a list of more than 16,000 thousand up to date active onion domains and I'm trying to download each page with parallel requests through python with tor client as the proxy. All requests take ...
0
votes
1
answer
52
views
Tor trying to connect to a deleted bridge
I noticed some old bridges and deleted them. Tor still tries to connect to them.
Is there any place that tor reaches the bridge beside etc/tor/torrc?
1
vote
0
answers
655
views
How to correctly programatically check if Tor socks proxy is working or not?
I have been thinking lately how to check correctly whether Tor is actually working or not in an application that sends HTTP requests over Tor. I'm aware that this question is somewhat fuzzy because ...
2
votes
0
answers
615
views
Using Tor over IPv6
Can someone explain what I have to configure to get tor working over ipv6 on client-side?
$ torify telnet -6 www.google.com 80
telnet: could not resolve www.google.com/80: Non-recoverable failure in ...
0
votes
1
answer
890
views
Is there a C/C++ Tor API?
I am looking for a (preferably Open Source) API usable in C/C++, that enables one to send/receive data over the Tor network. So I want to build an application that uses sockets to communicate data ...
0
votes
0
answers
696
views
Tor stuck at start-up
I have been using Tor for while. It was working fine but today it refuses to start. It gets stuck here (at start-up):
Apr 29 08:06:14.918 [notice] Tor 0.4.4.0-alpha-dev (git-b6e60f26dd04fa4f) running ...
1
vote
1
answer
1k
views
Tor.services refusing to run on archlinux
I just did a full upgrade on my archlinux and now for some reason I can't get
systemctl start tor.service
to run. I can use the tor browser without this, but I usually need this service up before ...
0
votes
1
answer
748
views
Using nmap with torsocks on VPN
I am trying to use nmap with torsocks while connected to VPN. When i used this (sudo torsocks nmap -sS 1.2.3.4) command i am getting "nmap route_dst_netlink: can't find interface "tun0" ...
0
votes
0
answers
128
views
tor high traffic p2p
There are these "don't use tor for bittorent" and "bitcoin over tor is not a good idea" statements. I wonder if that is only valid because it is mixed traffic, where you have users ...
1
vote
0
answers
319
views
How to prevent torsocks timeouts from concurrent calls?
I'm running a distant HTTP server, serving a single page, used for delay measurements purposes.
From my client, I'm generating multiple different custom circuits each being assigned a new upcoming ...
1
vote
1
answer
1k
views
Openvpn over TOR
I am trying to route my vpn traffic over TOR (Tor is using bridges) on ubuntu by simply adding the following in the tor configuration:
UseBridges 1
Bridge bridge1 fingerprint1
Bridge bridge2 ...
0
votes
1
answer
374
views
Can't connect to Tor with python 3.9
I'm trying to access my tor server with python with the module torpy, but it didn'y worked. It continue sayying that the server is not reachable, but with tor I can connect with it.
I've tryied this ...
0
votes
1
answer
489
views
What's the recommended timeout when torifying an application to access an onion service (torsocks .onion timeout)?
What does the Tor Project recommend to be the best timeout setting to use when contacting an onion service?
I'm wrapping an ancient perl script with torsocks so that it can reach my website via its ....
0
votes
1
answer
2k
views
Opening Control Port On Tor
It seems that when I enable the control port on port 9051, the IP would be 127.0.0.1:9051. When I visit the website, it says that it is a socks proxy, not an HTTP proxy.
1
vote
2
answers
659
views
Does torify/torsocks give access to hidden services?
Most torify documentation is about accessing non-hidden services.
Yet .onion address look like real tcp addresses, does torify make those available.
0
votes
0
answers
2k
views
How to route all network traffic through tor
I'm trying to create a network that sends all traffic through tor.
So far I've got a PFsense box acting as a router and a separate debian instance with tor installed and running. Is there a way to ...
1
vote
0
answers
47
views
Republish Hidden Service Descriptor to HSDir
Someone thought it would be funny to ddos my hidden service. Now my .onion domain after days of ddos stopping, and stop > start the tor service doesn't want to display. How do I republish my onion ...
0
votes
2
answers
731
views
IRC Server-to-Server over Tor
If this question doesn't belong here, I apologize.
I've seen a lot of questions about setting up and accessing an IRC server behind hidden services, and this obviously as a 'standalone' server(and ...
0
votes
2
answers
147
views
connect two server via tor
if we have two server let's say server1(92.92.92.92) server2(76.76.76.76).
I'm working on redirect incoming traffic on server1 port 4444 to server2 port 12345,this is easy with iptables rule on ...
0
votes
1
answer
1k
views
Tor service failing to start in Linux
[user@PC ~]$ sudo systemctl status tor
● tor.service - Anonymizing Overlay Network
Loaded: loaded (/usr/lib/systemd/system/tor.service; enabled; vendor preset: disabled)
Active: failed (...