Questions tagged [configuration]
Questions about configuring Tor software.
951
questions
0
votes
1
answer
16
views
Tor exited during startup on fresh install
I have used the Tor browser for a long time with no problem, but I got a new laptop recently and every time I install and run Tor, I get the same error.
Tor exited during startup. This might be due to ...
1
vote
1
answer
40
views
Is there a way to force Tor reconnect immediately after network down?
When I turn off my connection and connect again, Tor takes between 10 and 30 seconds to reconnect.
Is there a way to force Tor reconnect immediately after network goes back?
- 23
1
vote
0
answers
21
views
Bridge distribution mechanism says "none" despite it having been set in torrc?
So I am running a new bridge relay at https://metrics.torproject.org/rs.html#details/D8931228F0FEB5668C7F5680D9B6CDB2AF86690E
Oddity happening, despite it being listed in the torrc confoguration to be ...
0
votes
1
answer
47
views
Should I use the same server for webserver and the database?
I want to start hosting my hidden service and be as secure as possible.
It is currently just some PHP Code and a MySQL database.
Now I am wondering if I need a external server to host my database or ...
0
votes
1
answer
81
views
How to use tor browser inside a transparent proxy?
Is it possible to use tor browser inside a transparent proxy? I try to use the tor browser inside a transparent proxy but I can't, it gives an error. The transparent proxy itself works perfectly, in ...
0
votes
1
answer
41
views
I can not start my Tor relay on my Fedora system
This is the lines that I added to the torrc file
Nickname myNiceRelay # Change "myNiceRelay" to something you like
ContactInfo your@e-mail # Write your e-mail and be aware it will be ...
0
votes
0
answers
149
views
Cloudflare changes my Tor Exit Node
I set up in Tor Browser Exitnodes {lu} StrictNodes 1 and it works very well on all websites. But when I go to one website where they have cloudflare, I will see the "Checking If The Site ...
- 1
0
votes
1
answer
96
views
Exit Node Jumping While Using StrictNodes in Torrc
I have seen a situation where I'm on non-onion website and the exit node jumps while the site is loading. If I hit the "New Circuit for this Site" button, the exit node starts in RO and ...
0
votes
1
answer
46
views
Running multiple onion services
I want to run multiple onion services on one laptop . my questions are.. where is the optimal place to keep a separate directory for each onion service? how do i know which ports to use, which ports ...
0
votes
1
answer
58
views
Middle/Guard relay:WARN Bad password or authentication cookie on controller WARN Your server has not managed to confirm reachability for its ORPort(s)
OS: Ubuntu Server 22.04.2
I'm running a tor relay on an old laptop. I'm managing it on my main computer with ssh. From my perspective this is ideal because in theory I could manage multiple nodes from ...
0
votes
0
answers
112
views
What ports do I need to open on my UFW firewall? I cannot log into nyx. Do I need to also open my 9051/tcp port?
I have just installed tor middle relay using this youtube guide.
I did everything up until the 12th minute of this video.
I have tor installed on a vps server I run from Vultr.
Then I have installed ...
- 143
0
votes
0
answers
90
views
Tor over Tor: Is it really risky?
I would like to discuss about the different tor config for achieving a better anonymity and prevent or making harder a de-anonymize attack (via tor-nodes by correlating traffic from user to endpoint)
...
- 11
1
vote
1
answer
95
views
Exact location of the torrc configuration file for Tor Browser Bundle
I'm currently using the Tor Browser Bundle on a Debian 11 machine, I downloaded it from the Tor website.
I need to customize the ExitNodes, in order to do this I have to edit the torrc file.
I have ...
- 111
0
votes
1
answer
53
views
I am on Ventura - I don't see this torrc file at all
My tor is installed in the applications keep getting this error that my torrc file could be corrupted. I have deleted and re-installed.
my Library/app support/ does not have a Tor anything directory?
...
- 1
0
votes
1
answer
123
views
Can't specify any guard nodes in torrc file
I am trying to do some research for my school thesis related to the Tor network, and I need to specify and use only one guard relay that I own while using the Tor browser. I tried to specify it with ...
- 1
0
votes
0
answers
31
views
Hello, how would I go about changing the tor homepage?
I know this question has already been asked (all answers outdated)
What i'm trying to do is make the "connect to tor" on the homepage to say something different.
I think i've tried almost ...
- 1
0
votes
0
answers
98
views
Tor Transparent proxy as gateway not working
I am trying to setup a Tor Transparent Proxy and redirect all its traffic to eth1 which will act as gateway.
Network setup:
eth0 < public interface
tap0 192.168.56.1 < Tor interface
eth1 10.10.0....
- 1
0
votes
1
answer
85
views
Torr file editor will automatically restore
I want to modify the configuration of the Torrc of the Tor browser. Before the Tor browser 12 version, the Torrc file is set to read only attributes and can be used normally, but the Torrc file is set ...
- 1
0
votes
0
answers
102
views
Tor Browser stop working after few months' usage after last update version 12
Tor was working extremely well then it stops after the automated update. I have checked the time and date and the time zone all is alright. I look in the files and was not sure of what I was looking ...
0
votes
0
answers
198
views
How do I re-enable drag and drop (previously working) for Tor Browser 12?
Up until the latest update of the Tor Browser 12.0, I was able drag and drop images/links to my desktop. My system is Windows 11. With this release I get a red circle with a red diagonal line ...
- 1
1
vote
2
answers
284
views
How to stop Tor browsers from forging the user agent string?
The Tor browser is useful when you want to read regionally restricted websites, for example.
Unfortunately, the Tor Browser also changes the browser agent string, so that some websites that check it ...
- 22
0
votes
0
answers
123
views
Make Tor go through bridge by configuring torrc file
Hey everyone i want to know is there anyway that when i switch on my pc (os: kali linux)
my pc automatic get connected to tor using bridge? I have already used normal systemctl command to start Tor by ...
- 1
0
votes
1
answer
77
views
Two onion links to one site
I want to make two onion links to one site on my web server
I created a new address with mkp224o. Got the hostname file and 2 keys.
I put it in var/lib/tor
Edited the torrc
Now it's like this:
...
0
votes
0
answers
139
views
How to use a specfic Tor middle node
I have a question related to Tor middle node. I already see some of the answers from here. But non of them is recent so I was thinking maybe some imporoment happen in Tor by now. I want to choose a ...
- 1
2
votes
1
answer
43
views
Private key in bash history a security issue?
Assume I generate a Private key for a hidden service. Assume I receive it in base64 encoding (this can happen for example by using shallot and posting the results to stdout). Assume I install tor and ...
1
vote
0
answers
82
views
How does Tor deal with IP changes on cellular data
Example: When using cellular data it is common to lose connection, and reconnect. How does Tor Browser deal with this, are there any security implications? i.e leaking of data to connected websites?
- 11
0
votes
1
answer
1k
views
How to exclude specific county from Entry Node by torrc file?
Its known its possible to set specific countrys by adding lines like follow, to torrc file from Tor browser.
EntryNodes {??},{ug},{us},{fr} StrictNodes 1
ExitNodes {??},{ug},{us},{fr} StrictNodes 1
...
- 22
0
votes
1
answer
69
views
Unable get hidden service address
I followed this post:
https://www.privex.io/articles/setup-tor-hidden-service-website/
to create a local lan website with ubuntu.
But After I configurated and restarted the tor service.
No hostname ...
- 1
1
vote
0
answers
70
views
Tor Browser not suggesting ".onion available"?
I am using Tor Browser 11.5.7 (based on Mozilla Firefox 91.13.0esr) (64-bit)
torproject support says:
Onion-Location is a new HTTP header that web sites can use to
advertise their onion counterpart. ...
- 111
0
votes
1
answer
156
views
How to set hop count to 1?
I have set up an onion service to access my local network without forwarding ports. The service doesn't need to be anonymous and I am the only one accessing it (client authentication). So I want to ...
- 103
0
votes
0
answers
70
views
Hidden service setup
Planning on starting my own hidden service but would want some advice regarding the security/privacy. Looking for someone with experience to be able to tell me from A to Z (from nothing to finished ...
0
votes
1
answer
208
views
Vanilla bridges work fine in Tor Browser (Windows) and Orbot (Android) but doesn't anywhere else
Vanilla bridges do not work in OnionFruit vpn-style program for Windows, and on my Debian system - tor service won't start also.
In Debian 10 I've added these lines at the end of /etc/tor/torrc file:
...
0
votes
0
answers
125
views
TOR bridges & key certificate
I have configured a Centos 7 server with TOR and obfs4proxy and server is running OK. On the client side, I am also using a Centos 7 machine. I have made the following changes to /etc/tor/torrc config ...
- 1
0
votes
1
answer
601
views
If I exclude Tor nodes using option ExcludeNodes, will it exclude also some Tor nodes select by options EntryNodes and ExitNodes?
I have these options in my torrc file:
ExitNodes {at},{be},{bg},{ch},{cz},{cy},{de},{hk},{is},{jp},{lu},{nl},{no},{pa},{ro},{sc},{sk},{si},{ua},{vg}
EntryNodes {at},{be},{bg},{ch},{cz},{cy},{de},{hk},{...
- 190
0
votes
1
answer
187
views
Servers must be able to freely connect to the rest of the Internet, so they must not set UseBridges
trying to configure bridges, but I'm getting error:
Servers must be able to freely connect to the rest of the Internet, so they must not set UseBridges
my config in /etc/tor/torrc
User tor
SOCKSPort ...
- 103
1
vote
0
answers
572
views
Tor Browser does not use exit nodes from specified country on certain websites
I just realized that on certain websites the tor-browser ignores my exit node policy.
I specify a certain country as exit node but on certain websites the circuit changes on its own and I receive exit ...
- 123
1
vote
3
answers
3k
views
Cannot force Tor Browser to use exit nodes from specified country
I might experience a bug here. I cannot select a specific country as exit node.
I am using debian 10 with a standalone torbrowser version 11.0.11 (I will update soon, but I don't think it is a version ...
- 123
0
votes
1
answer
180
views
Tor stream isolation using torcc
I use torsocks for 3 applications: IRC, SSH and Thunderbird (My Tor browser uses port 9150 from the torbrowser bundle daemon). I want to use a different tor circuit for each application. On the ...
- 101
1
vote
0
answers
42
views
WARN: Could not find a node that matches the configured _HSLayer2Nodes set
can anyone explain to me, how to interpret this Log-Message?
[WARN] Could not find a node that matches the configured _HSLayer2Nodes set
Running Tor 0.4.7.7 on Debian Bullseye.
- 113
0
votes
1
answer
50
views
ExitPolicy for IPv6 not recognized
I run my Tor Instance in DualStack (IPv4 & IPv6).
Tor 0.4.7.7
My Exit-Policy in torrc looks like:
ExitPolicy accept6 *:80-81 # HTTP - Hypertext Transfer Protocol / web ...
- 113
0
votes
1
answer
123
views
Why does Tor Metrics show my bridge offline after a few days?
I've been running a Tor Bridge for about a month now. Every day I check the system logs to ensure the bridge hasn't broken. I also check Tor Metrics to see the data on my bridge. Twice now, I have ...
- 1
0
votes
1
answer
149
views
Error accessing onion service websites
When I access sites on the onion network, I get the following error: [warn] Onion address [scrubbed] requested from a port with .onion disabled how do I solve this problem?
0
votes
1
answer
2k
views
Can't connect to the network
Windows 10 LTSC, Browser 11.5a4 (other versions have the same problem), time is synchronized, no antivirus, the firewall is disabled temporarily.
Log:
2/26/22, 19:55:40.740 [NOTICE] DisableNetwork is ...
- 1
0
votes
1
answer
238
views
How can I arrange proxies with tor in a specific order in proxychain?
I am aware that I can have the proxy list in order with "Dynamic chaining". However I am not sure with the flow of the connections in relation with tor (like will proxy go first before tor ...
0
votes
1
answer
164
views
Tor -> Tor help with orbot
I use briar as a messenger and also use orbot system wide with vpn mode switched on. I was wondering if this created tor over tor scenario?
0
votes
1
answer
439
views
Tor wont connect all of a sudden
Ive used tor regularily for along time, yesterday I installed Avast and Tor stopped working, I've remove avast and fixed all the settings I can think of but the log still says this:
1/28/22, 05:02:55....
- 1
0
votes
1
answer
124
views
Unable to save edited torrc in Tails
Logged in as admin then used:
sudo nano /etc/tor/torrc
ExcludeNodes {us},{de},{fr}
ExcludeExitNodes {us},{au},{ca},{nz},{gb},{fr}
CTRL-X
sudo systemctl restart tor
This works for the current session ...
- 1
0
votes
1
answer
264
views
Create a SocksPort with fix circuit/greater MaxCircuitDirtiness
For all my applications I am happy with the 10 min MaxCircuitDirtiness - it shall not change.
But there is one application that needs the same IP for multiple requests (more than 10 min apart).
I ...
0
votes
1
answer
287
views
How can I limit the numbers of connections a Tor Relay is able to make? (iptables)
My router doesn't seem to have enough RAM to hold all Tor connections. My internet's basically dead. Have to use mobile internet :(
So I have to limit the connections that Tor makes or the server ...
- 17
0
votes
1
answer
22
views
V3 Client Auth breaks systemctl default service
https://bitcoin.stackexchange.com/questions/111276/not-able-to-create-private-v3-onion-service/111603#111603
This is related to the above post. Running tor with -f /etc/tor/torrc works fine, but it ...
