Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
    Bumped by Community user
2 reformatting
source | link

I have been trying to set up a relay from a laptop running Ubuntu 16.04 connected to the internet through a BT Home Hub 6, and am having a problem reported as being with Port 9001 not being reachable.

What am I doing wrong, or what settings in my torrc file, or on the Home Hub 6 setup, do I have to add, delete or change?

Or am I trying to do the impossible, and should forget about setting up any or all of a bridge relay, a full relay or an exit relay?

The active commands in my torrc file are shown below.

SOCKSPort 0 # Default: Bind to localhost:9050 for local connections.

Log notice file /home/XXXXXX/tor/notices.log

ORPort 9001

BridgeRelay 1

ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy

ExtORPort auto

Nickname ieditconfig100times

RelayBandwidthRate 2500 KBytes # Throttle traffic to 100KB/s (800Kbps)

RelayBandwidthBurst 5000 KBytes # But allow bursts up to 200KB (1600Kb)

AccountingMax 100 GBytes

AccountingStart day 03:00

ContactInfo Xxxxxx Yyyyy

ExitPolicy reject :, # no exits allowed

SOCKSPort 0 # Default: Bind to localhost:9050 for local connections. 
Log notice file /home/XXXXXX/tor/notices.log
ORPort 9001 
BridgeRelay 1 
ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy 
ExtORPort auto 
Nickname ieditconfig100times 
RelayBandwidthRate 2500 KBytes  # Throttle traffic to 100KB/s (800Kbps) 
RelayBandwidthBurst 5000 KBytes # But allow bursts up to 200KB (1600Kb) 
AccountingMax 100 GBytes
AccountingStart day 03:00 
ContactInfo Xxxxxx Yyyyy <zzzzzzzzzzz@yahoo.co.uk> 
ExitPolicy reject *:*, # no exits allowed

The message in the notices.log file ends with

Sep 28 17:20:28.000 [warn] Your server (XX.YYY.ZZZ.AAA:9001) has not managed to confirm that its ORPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.

Sep 28 17:20:28.000 [warn] Your server (XX.YYY.ZZZ.AAA:9001) has not managed to confirm that its ORPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.

I have been trying to set up a relay from a laptop running Ubuntu 16.04 connected to the internet through a BT Home Hub 6, and am having a problem reported as being with Port 9001 not being reachable.

What am I doing wrong, or what settings in my torrc file, or on the Home Hub 6 setup, do I have to add, delete or change?

Or am I trying to do the impossible, and should forget about setting up any or all of a bridge relay, a full relay or an exit relay?

The active commands in my torrc file are shown below.

SOCKSPort 0 # Default: Bind to localhost:9050 for local connections.

Log notice file /home/XXXXXX/tor/notices.log

ORPort 9001

BridgeRelay 1

ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy

ExtORPort auto

Nickname ieditconfig100times

RelayBandwidthRate 2500 KBytes # Throttle traffic to 100KB/s (800Kbps)

RelayBandwidthBurst 5000 KBytes # But allow bursts up to 200KB (1600Kb)

AccountingMax 100 GBytes

AccountingStart day 03:00

ContactInfo Xxxxxx Yyyyy

ExitPolicy reject :, # no exits allowed

The message in the notices.log file ends with

Sep 28 17:20:28.000 [warn] Your server (XX.YYY.ZZZ.AAA:9001) has not managed to confirm that its ORPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.

I have been trying to set up a relay from a laptop running Ubuntu 16.04 connected to the internet through a BT Home Hub 6, and am having a problem reported as being with Port 9001 not being reachable.

What am I doing wrong, or what settings in my torrc file, or on the Home Hub 6 setup, do I have to add, delete or change?

Or am I trying to do the impossible, and should forget about setting up any or all of a bridge relay, a full relay or an exit relay?

The active commands in my torrc file are shown below.

SOCKSPort 0 # Default: Bind to localhost:9050 for local connections. 
Log notice file /home/XXXXXX/tor/notices.log
ORPort 9001 
BridgeRelay 1 
ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy 
ExtORPort auto 
Nickname ieditconfig100times 
RelayBandwidthRate 2500 KBytes  # Throttle traffic to 100KB/s (800Kbps) 
RelayBandwidthBurst 5000 KBytes # But allow bursts up to 200KB (1600Kb) 
AccountingMax 100 GBytes
AccountingStart day 03:00 
ContactInfo Xxxxxx Yyyyy <zzzzzzzzzzz@yahoo.co.uk> 
ExitPolicy reject *:*, # no exits allowed

The message in the notices.log file ends with

Sep 28 17:20:28.000 [warn] Your server (XX.YYY.ZZZ.AAA:9001) has not managed to confirm that its ORPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.
1
source | link

Problems setting up Tor bridges and relays with UK internet BT Home Hub 6

I have been trying to set up a relay from a laptop running Ubuntu 16.04 connected to the internet through a BT Home Hub 6, and am having a problem reported as being with Port 9001 not being reachable.

What am I doing wrong, or what settings in my torrc file, or on the Home Hub 6 setup, do I have to add, delete or change?

Or am I trying to do the impossible, and should forget about setting up any or all of a bridge relay, a full relay or an exit relay?

The active commands in my torrc file are shown below.

SOCKSPort 0 # Default: Bind to localhost:9050 for local connections.

Log notice file /home/XXXXXX/tor/notices.log

ORPort 9001

BridgeRelay 1

ServerTransportPlugin obfs4 exec /usr/bin/obfs4proxy

ExtORPort auto

Nickname ieditconfig100times

RelayBandwidthRate 2500 KBytes # Throttle traffic to 100KB/s (800Kbps)

RelayBandwidthBurst 5000 KBytes # But allow bursts up to 200KB (1600Kb)

AccountingMax 100 GBytes

AccountingStart day 03:00

ContactInfo Xxxxxx Yyyyy

ExitPolicy reject :, # no exits allowed

The message in the notices.log file ends with

Sep 28 17:20:28.000 [warn] Your server (XX.YYY.ZZZ.AAA:9001) has not managed to confirm that its ORPort is reachable. Relays do not publish descriptors until their ORPort and DirPort are reachable. Please check your firewalls, ports, address, /etc/hosts file, etc.